Product Specification
Carcass material:
16mm (nominal) high moisture resistant particleboard to ALL surfaces - no thin back boards or drawer bases
Door material:
Tough 16mm (nominal) high moisture resistant MDF substrate
ABS edge heavy duty 1mm thick, mechanically applied using heat & high pressure - no flimsy iron-on edge.
Door Hinges: Easy fit adjustable hinges, screwless fixing to door.
Care & Maintenance
Your MELAMINE doors & panels are manufactured from the highest quality materials and designed to provide years of trouble free service.
Whilst your doors are made from a Moisture Resistant Medium Density Fibreboard (MRMDF) and as with any wood based panel cannot be made totally waterproof, care should be taken to wipe up spills immediately, ensuring the doors are not exposed to high or continueous levels of moisture, steam and humidity.
MELAMINE doors & panels should be cleaned as follows:
Stains
Using a mild household spray wipe down the doors or panel with a soft cloth taking care not to rub too hard. Dry using a soft cloth so as not to leave any spray on the door or panel.
You may also use Methylated Spirit on a soft cloth, using a circular cleaning motion. Thoroughly clean over the wider area with water and detergent on a damp cloth afterwards to remove any residual Methylated Spirit.
Always ensure that you refer to the recommendations provided by the cleaning product manufacturer before use.
To ensure that your Warranty will not be void, DO NOT use any of the following on MELAMINE doors & panels :
Commercial Cleaning Products, Abrasive Cleaners, Scouring Pads or Abrasive Papers, Acids and Alkalis, Solvents, Thinners, Turpentine (Turps), Ammonia, Bleach, Acetone, M.E.K. and any other cleaning agents containing Organic Solvents or the above mentioned products.